Avoid swiping with your finger stiff or pressed too hard onto the sensor, and take care to ensure that the center of the fingerprint is touching the sensor before swiping. Either of these conditions may cause fingerprint reading to fail.
TCheck the center of the fingerprint whorl before swiping and then ensure this is swiped along the center line of the sensor.
There is a possibility of authentication failures if the finger is swiped too quickly or too slowly - follow any
Points to note about the Fingerprint Sensor
Please be aware of the following considerations when using the fingerprint sensor. A failure to follow these guidelines might result in damage to the sensor, sensor failure, fingerprint recognition problems or a lower fingerprint recognition success rate.
Do not scratch or poke the sensor with your nails or any hard or sharp objects.
Do not press the sensor strongly.
Do not touch the sensor with a wet finger or any wet objects - keep the sensor surface dry and free from water vapor.
Do not touch the sensor with a soiled or dirty finger as minute foreign particles of dust and dirt may scratch it.
Do not paste stickers or write on the sensor.
Do not touch the sensor with a finger or any other object which may have a
Observe the following before you place your finger on the sensor whether for fingerprint enrollment/registration or recognition.
Wash and dry your hands thoroughly.
Remove static electricity from your fingers by touching any metal surface. Static electricity is a common cause of sensor failures, especially when the weather is dry.
Clean the sensor with a
Avoid the following finger conditions for enrollment or recognition as they may result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate
Soaked or swollen finger, for example as may occur after taking a bath.
Injured finger
Wet finger
Soiled or oily finger
Extremely dry skin condition on finger
Observe the following to improve the fingerprint recognition success rate.
User's Manual |
