Using the Power Outlet

If you use the AC adapter (sold separately) in a room with a power outlet, you can take photographs for an extended period of time. This also prevents failed photographs due to battery wear or failed transfer of data to a PC. For details on handling the AC adapter, be sure to read page 14.

IMPORTANT

Before you connect or disconnect the AC adapter, be sure to turn the camera OFF. If the AC adapter is connected or disconnected with the power ON, the camera may malfunction or the recorded data may be erased (destroyed) even if the batteries are loaded.

The camera may not start normally if you connect the AC adapter not on the power off status. In this case, turn the mode dial to OFF, then turn on again.

Open the connector cover 1, and insert the AC

 

adapter connector plug into the DC IN 5V terminal on

1

the camera 2.

2

Insert the AC adapter power plug into the power outlet.

- 27 -

27-35 PDRM11-E

27

01.6.21, 6:01 PM

Getting Ready

 

Photography

Basic

Erasing Images

Playing Back/

Applications

Other

Information

Additional

Page 31
Image 31
Toshiba PDR-M11 instruction manual Using the Power Outlet