Toshiba PDR-M11 Sequential Image Photography Burst Mode, Shutter is opened and closed 4 times

Sequential Image Photography (Burst Mode)

The sequential shot takes four pictures in sequence with a 1-second (low- light) to 1/30-second (bright-light) interval between each frame.

This mode is effective for continuously photographing moving subjects.

Getting Ready

Set the mode dial to [ ].

Set the REC. mode to [BURST].

1Press the MENU button.

2Use the or buttons to select [REC.MODE] and press the

button.

3Use the or buttons to select [BURST] and press the

ENTER button.

4Press the MENU button.

☞For details on the REC. mode, ➲ Page 53.

[ ] displayed in the LCD monitor or the status display.

REC . MENU

W. B . AUTO

REC . MODE 1 SHOT

E . X . P .	1 SHOT
COLOR	BURST
SHARP	NORMAL
D I SPL AY	AL L

Photography	Basic
Erasing Images	Playing Back/

Compose the picture, press the shutter button down halfway, and press it down fully. ➲ Page 37

The shutter is opened and closed 4 times.

Memo

•The photography interval changes according to the photographic conditions.

•Flash photography is not possible.

•To take a sequential shot, there must be at least four images left on the SmartMediaTM.

•The burst photography is not possible when you set the image quality to TIFF.

If you want to take a picture in burst mode, set the image quality to JPEG (★★★, ★★ or ★).

- 51 -

51-55 PDRM11-E 51 01.6.21, 6:03 PM

Applications	Other
Information	Additional