Toshiba PDR-M11 Erasing Images Erase Frame, Set the mode dial to or, Erases one image at a time

	Getting Ready
Basic	Photography
Playing Back/	Erasing Images
Other	Applications
Additional	Information

Erasing Images (Erase Frame)

Erases one image at a time.

Note, however, that images cannot be erased when they are protected (➲ Page 59) or the SmartMedia™ is write-protected (➲ Page 32).

Set the mode dial to [ ] or [ ].

When [ ] is selected, the last image frame appears on the LCD monitor.

When [ ] is selected, use the or buttons to select the image to be erased.

When [ ] is selected, the last image is selected.

Press the erase button.

Use the or buttons to select [OK], and press the	DELETE
ENTER button.
This erases the image and returns to the previous mode.
To cancel erasing of image data, select [CANCEL], and press the
ENTER button.		OK
		CANCEL
To continue erasing images, repeat the above
procedure from step 2.

Memo

•When [ ] is displayed on the LCD monitor, cancel the protection (➲ Page 59).

•If you take a photograph after erasing an image, a number continuing from the last photographed image is assigned as the image number.

-64 -

56-69 PDRM11-E 64 01.6.21, 6:30 PM