Toshiba on, Bluetooth, Cannot access, Restoring the, pre-installed, Recovery Discs, Operating Basics, Bluetooth device, Communication Switch is set to on

Troubleshooting

Bluetooth

For further information on Bluetooth wireless communication, please refer to Chapter 4, Operating Basics.

Problem	Procedure
Cannot access	Check to ensure the computer's Wireless
Bluetooth device	Communication Switch is set to on.
	Check to ensure the Bluetooth Manager
	application is running on the computer and that
	power to the external Bluetooth device is turned
	on.
	Check to ensure that no optional Bluetooth
	Adaptor is installed in the computer - the built-in
	Bluetooth hardware cannot operate
	simultaneously with another Bluetooth controller.
	If you are still unable to resolve the problem,
	contact your reseller, dealer or service provider.

Recovery Discs

ProblemProcedure

The following message appears when executing Recovery Disc Creator.

"The Recovery DiscCreator can not be launched because there is no recovery partition."

You will see this message if you have previously chosen to remove the partition and are trying to create "Recovery Media".

When there is no recovery partition, the Recovery Disc Creator cannot make Recovery Media.

However, if you have already created a "Recovery Media", you can use it to restore the recovery partition.

Simply follow the instructions in Restoring the pre-installed software from your created Recovery Discs section in Chapter1, Getting Started.

You will be directed to select "Restore Original Factory Image" from the drop-down menu.

If you have not created "Recovery Media", please contact TOSHIBA support for assistance.

User’s Manual 8-26