Hardware, Utilities and Options

11. Screw in the two screws and replace the memory module cover.

Screws

Memory module cover

Figure 3-12 Seating the memory module cover

12.Insert the tabs on the front of the keyboard into the corresponding notches on the computer and place the keyboard down.

When seating the keyboard, be sure to connect the circuit board if the keyboard ribbon cable was pulled out while you were removing the keyboard.

13. Replace the keyboard and secure it using the two screws.

Be sure to use all two screws removed in step 7. Make sure no screw was dropped into the computer. Make sure no foreign matter can be found inside the computer.

Keyboard

Tabs

Screws

Figure 3-13 Replace the keyboard

14.Set the keyboard brace into its groove and hold down to secure the latches.

User’s Manual

3-30