Toshiba R700 Problem, Battery, Battery, Battery, Select a, Procedure, Power saver, power plan in the Power Options

	PORTÉGÉ/TECRA R700 Series
Problem	Procedure
Battery doesn’t	If the battery is completely discharged, it will not
charge when the AC	begin charging immediately, in these instances you
adaptor is attached	should wait a few minutes before trying again. If the
( Battery indicator	battery still does not charge, you should check that
	the power outlet the AC adaptor is connected to is
does not glow
	supplying power - this can be tested by plugging
orange).
	another appliance into it.
	Check whether the battery is hot or cold to the touch
	- if so, it will not charge properly and should be
	allowed to reach room temperature before you try
	again.
	Unplug the AC adaptor and remove the battery to
	make sure its connecting terminals are clean - if
	necessary wipe them with a soft dry cloth lightly
	dipped in alcohol.
	Connect the AC adaptor and replace the battery,
	taking care to ensure that it is securely seated in the
	computer.
	Check the Battery indicator - if it does not glow,
	allow the computer to charge the battery for at least
	twenty minutes. If the Battery indicator starts to
	glow after this period, allow the battery to continue
	to charge for at least another twenty minutes before
	turning on the computer. However, if the indicator
	still does not glow, the battery may be at the end of
	its operating life and should be replaced. However,
	if you do not believe the battery is at the end of its
	operating life, you should speak to your reseller,
	dealer or service provider.
Battery doesn’t	If you frequently recharge a partially charged
power the computer	battery, the battery might not charge to its full
as long as expected	potential - in these instances you should fully
	discharge the battery and then attempt to charge it
	again.
	Check the Power saver option under Select a
	power plan in the Power Options.

User’s Manual 8-6