PORTÉGÉ/TECRA R700 Series

Display mode at "List All Modes" HD Format

720 by 576, True Color (32bit),

576p

50Herts

 

 

 

720 by 480, True Color (32bit),

480p

60Herts

 

 

 

The above display mode is a typical HDMI display mode. The selectable display modes will vary for different HDMI monitors.

TOSHIBA Hi-Speed Port Replicator

In addition to the ports available on the computer, the TOSHIBA Hi-Speed Port Replicator also provides several kinds of ports.

The TOSHIBA Hi-Speed Port Replicator connects directly to the docking interface on the underside of the computer. The AC adaptor connects the TOSHIBA Hi-Speed Port Replicator to a power source.

■You must connect the AC adaptor before you connect to a TOSHIBA Hi-Speed Port Replicator.

■When a TOSHIBA Hi-Speed Port Replicator is connected to the computer, you can not use the following computer’s ports: LAN jack, DC IN 19V jack and External monitor port.

■When connecting an AC Adaptor to the TOSHIBA Hi-Speed Port Replicator, use only the AC Adaptor included with TOSHIBA Hi-Speed Port Replicator. Do not use the computer’s AC Adaptor.

The following ports are available on the TOSHIBA Hi-Speed Port Replicator.

■RJ45 LAN jack

■External monitor port

■DC IN 19V jack

■Security lock slot

■Universal Serial Bus 2.0 port (four)

■Universal Serial Bus 3.0 port (two)

■Serial port

■HDMI out port (some models are equipped with a HDMI out port)

■Microphone jack

■Line out (Headphones, Speakers)

■When the replicator is docked, booting from USB 3.0 ports may be not available. To check whether your computer supports booting from USB 3.0, please contact TOSHIBA support for assistance.

■Refer to the TOSHIBA Hi-Speed Port Replicator User's Manual for more details on connection methods.

User’s Manual

3-34