Toshiba R700 eSATA device, Additional memory module

	PORTÉGÉ/TECRA R700 Series
Problem	Procedure
The "USB Wakeup	When USB Sleep and Charge function is enabled,
function" does not	the "USB WakeUp" function does not work for ports
work.	that support the USB Sleep and Charge function.
	In that case, use an USB port that does not have
	the USB Sleep and Charge function-compatible
	icon ( ) or change to disable USB Sleep and
	Charge function.

eSATA device

In addition to the information in this section, please also refer to the documentation supplied with your eSATA device.

Problem	Procedure
eSATA device does	Remove the eSATA device from the computer and
not work	then reconnect it to a free port it in order to ensure it
	is firmly attached.
	A connected eSATA device may not be recognized
	if it is connected to the computer's eSATA/USB
	combo port while the computer is in Sleep Mode or
	Hibernation Mode. If this occurs, disconnect the
	eSATA device and then reconnect the device while
	the computer is turned on.
	Ensure that any required eSATA device drivers are
	properly installed - to achieve this you should refer
	to both the device documentation and the operating
	system documentation.
	If you are still unable to resolve the problem,
	contact your reseller, dealer or service provider.

Additional memory module

Please also refer to chapter 3, Hardware, Utilities and Options, for further information on installing and removing memory modules.

User’s Manual 8-16