Toshiba R700 Start, TOSHIBA, Mode *1, Hot keys, supply *1, power off *1, power off *1, Control Panel, Power Options, HDD automatic, Keypad overlay, System automatic

PORTÉGÉ/TECRA R700 Series

Access each function using the following procedures.

*1 To access the Power Options, click Start -> Control Panel -> System and Security -> Power Options.

TOSHIBA eco button Press this button to launch the TOSHIBA eco Utility.

TOSHIBA	The TOSHIBA Presentation button has the same
Presentation button	functionality as the Connect display button in the
	Mobility Center.
Hot keys	Hot keys are specific key combinations that let you
	quickly change the system configuration directly
	from the keyboard without running a system
	program.
Display automatic	This feature automatically cuts off power to the
power off *1	computer's display panel when there is no
	keyboard input for a specified time, with power
	being restored the next time a key is pressed. This
	can be specified in the Power Options.
HDD automatic	This feature automatically cuts off power to the
power off *1	hard disk drive when it is not accessed for a
	specified time, with power being restored when the
	hard disk drive is next accessed. This can be
	specified in the Power Options.
System automatic	This feature automatically shuts down the system
Sleep/Hibernation	into either Sleep Mode or Hibernation Mode when
Mode *1	there is no input or hardware access for a
	specified time. This can be specified in the Power
	Options.
Keypad overlay	A ten-key numeric keypad is integrated into the
	keyboard. Please refer to the Keypad Overlay
	section in chapter 5, The Keyboard, for information
	on using this feature.
Power on password	Two levels of password security, supervisor and
	user, are available to prevent unauthorized access
	to your computer.
Instant security	A specific hot key function automatically locks the
	system providing data security.
Intelligent power	A microprocessor in the computer's intelligent
supply *1	power supply detects the battery's charge,
	automatically calculates the remaining battery
	capacity and protects electronic components from
	abnormal conditions such as a voltage overload
	from the AC adaptor. This can be specified in the
	Power Options.

User’s Manual 3-7