Toshiba R700 memory media, Removing a memory media, Additional memory module, 1.Open the Safely Remove Hardware and Eject Media icon on the Windows Taskbar, Open the

PORTÉGÉ/TECRA R700 Series

Removing a memory media

The following instructions apply to all types of supported media devices. To remove a memory media, follow the steps as detailed below:

1.Open the Safely Remove Hardware and Eject Media icon on the Windows Taskbar.

2.Point to memory media and click the left Touch Pad control button.3.Press the memory media to partially extend it out of the computer.4.Grasp the media and remove it.

Figure 3-7 Removing memory media

1

1.Bridge media slot

■Make sure the Bridge Media slot indicator is out before you remove the memory media or turn off the computer’s power. If you remove the memory media or turn off the power while the computer is accessing the memory media, you may lose data or damage the media.

■Do not remove the memory media while the computer is in Sleep or Hibernation Mode. The computer could become unstable or data in the memory media could be lost.

■Do not remove only the miniSD/microSD Card while leaving the adaptor in the Bridge Media slot.

Additional memory module

You can install additional memory into the computer in order to increase the amount of system memory that is available. This section describes how to install and remove optional memory modules.

User’s Manual 3-24