Basic setup
F: Remote control settings (Continued)
Operating the second and third TOSHIBA HDD/DVD video recorders with the remote control of this recorder
Switches the codes to operate the recorder.
If you use the second and third TOSHIBA HDD/DVD video recorders, set the different remote codes for each recorder to avoid confusion in the response of the recorders.
Example: Setting this recorder’s remote control mode to DR 2, after another HDD/DVD recorder has been set to DR 1.
(It is necessary to set the remote control mode on both the recorder and the remote control.)
Setting up the recorder
1 Press SETUP.
The setting menu appears.
SETUP
2 Press 
/ 
to select “Operational settings”, then press ENTER.
| e.g. |
|
|
ENTER | Operational settings | ||
| Operation beep | Off |
|
| Completion beep | On |
|
| IR code | DR 1 | |
| Instant skip interval | 30 | sec. |
| Instant replay interval | 10 | sec. |
| Title thumbnail point | 35 | sec. |
| HDD/RAM title play | Title resume | |
| Still group interval | 3 | sec. |
| Priority contents | Photo | |
Press | / to select “IR code”, then press | ||
3 ENTER. |
|
| |
| e.g. |
|
|
ENTER | Operational settings |
| |
| Operation beep | Off | DR 1 |
| Completion beep | On | DR 2 |
| IR code | DR 1 | DR 3 |
| Instant skip interval | 30 sec. |
|
| Instant replay interval | 10 sec. |
|
| Title thumbnail point | 35 sec. |
|
| HDD/RAM title play | Title resume |
|
Start | Still group interval | 3 sec. |
|
Priority contents | Photo |
| |
|
|
| |
Press | / to select “DR 2” (example), then | ||
4 press ENTER. |
|
| |
| The submenu disappears. |
| |
| Press ENTER button and the IR code you selected is | ||
ENTER | activated. Operation may not be possible temporarily until | ||
| you set the corresponding mode of the remote control. | ||
| Proceed to the next setting. |
| |
50
