Connections
Connecting an antenna and TV
Connect your TV and the antenna to this recorder for recording and to view broadcast signals on the TV.
1 Disconnect the antenna cable from your TV, and connect it to the RF IN (FROM ANT.) terminal on the recorder.
2 Using the supplied coaxial cable of this recorder, connect the RF OUT (TO TV) terminal to the TV.
To RF IN (FROM ANT.) 1
To RF OUT (TO TV) 2
Coaxial cable (supplied)
e.g.
VHF/UHF antenna
Antenna cable (not supplied)
TV
2 
To antenna input
Antenna splitter
(not supplied)
| Types of an antenna terminal | |
VHF/UHF | may vary depending on the TV. | |
Check the type on your TV, and | ||
| ||
| connect properly using either | |
| method as shown. |
For connecting to a cable box or a satellite system, see 
page 22 to 25.
Note
•This connection ensures broadcast signals to be passed through to your TV. Unlike a VCR, you cannot assign channel 3 or 4 to playback from this recorder. The antenna input only passes through the broadcast signals to your TV.
Therefore to playback video from this recorder you must connect it to a video input on your TV. (See the next page.)
20
