Basic setup
C: Satellite set top box setting (Continued)
8 Press ENTER.
“Initial settings” menu returns.
To exit the setting menu, press SETUP button.
ENTER
If you have set “IR control” to “On” at step 5 (
page 41), turn on your satellite set top box and confirm its channels are selected by the number buttons or CH/Page buttons of the recorder’s remote control. If not, shift the
“C: Satellite set top box setting” is complete. Go to “D: Output sound setting” (
page 44).
Notes
•This setting will be reset to default if you redo the TV Guide On Screen® setup and select “Yes” at the cable selection (step 5,
page 34).
•The recorder can control satellite set top box of 3 digit channel selection only. If the channel control does not work properly,
set “IR control” to “Off” at step 5 on 
page 41.
42
