Toshiba RD-KX50SU, RD-XS52SU, RD-XS52SC owner manual Connecting an antenna and TV, Connections

Connections

Connecting an antenna and TV

Connect your TV and the antenna to this recorder for recording and to view broadcast signals on the TV.

1 Disconnect the antenna cable from your TV, and connect it to the RF IN (FROM ANT.) terminal on the recorder.

2 Using the supplied coaxial cable of this recorder, connect the RF OUT (TO TV) terminal to the TV.

VHF/UHF antenna

Antenna cable (not supplied)

To RF IN (FROM ANT.)1

TV

		HDMI OUTPUT			RF IN
					(FROM ANT.)
R	L	VIDEO	S-VIDEO
			INPUT1		RF OUT
					TO TV)
			INPUT3		CHANNEL
R	L	VIDEO	S-VIDEO	IR	CHANGE
					VHF / UHF

To RF OUT (TO TV) 2

Coaxial cable (supplied)

e.g.

2 To antenna input

Antenna splitter

(not supplied)

	Types of an antenna terminal
VHF/UHF	may vary depending on the TV.
	Check the type on your TV, and
	connect properly using either
	method as shown.

For connecting to a cable box or a satellite system, see page 22 to 25.

Note

•This connection insures accessibility of broadcast signals to your TV only. Unlike a VCR, you can not assign channel 3 or 4 for playback of this recorder, because an antenna input only passes through in the recorder. You must connect this recorder to a video input of your TV to enjoy playback picture from this recorder. (See the next page.)

20