Toshiba RD-XS52SU, RD-XS52SC, RD-KX50SU owner manual Connecting to a satellite system

Connections

Connecting to a satellite system

Choose one of the following according to your type of satellite receiver.

HDMI OUTPUT
VIDEO	S-VIDEO
	INPUT1
	INPUT3	CHANNEL
VIDEO	S-VIDEO	CHANGE
		IR

RF IN

FROM ANT.)

RF OUT (TO TV)

VHF / UHF

Satellite receiver

3CH

4CH

OUT IN

Satellite antenna

When the satellite receiver does not have audio/ video outputs

1Connect a satellite antenna to the satellite receiver.

2Connect the RF IN (FROM ANT.) terminal on the recorder and the RF OUT terminal of the satellite receiver.

3Connect the RF OUT (TO TV) terminal on the recorder and the antenna input connector of the TV.

You will need to:

•set “Cable Box/DBS” of “Set Top Box setting” to

“C.Box”. page 42

•set “Select Input” of “Set Top Box setting”to “3CH” or

“4CH”. page 42

You can control satellite channels from the recorder. Perform the below.

1)Connect the supplied IR cable to the CHANNEL

CHANGE IR jack of the recorder. page 25

2)Set “IR control” of “Set Top Box setting” to “On”.

page 42

Satellite antenna					Satellite
					receiver
			Audio outputs			Video output
					HDMI OUTPUT
DIGITAL AUDIO	Y	PB	PR			S-VIDEO
OUTPUT
BITSTREAM/PCM			COMPONENT OUTPUT			INPUT1
			OUTPUT			INPUT3	C
OPTICAL			S-VIDEO	R	L VIDEO	S-VIDEO	C
							IR

When the satellite system has audio/video outputs

1Connect a satellite antenna to the satellite system.

2Connect the INPUT1 or INPUT3 (VIDEO/L/R) jacks on the recorder and the audio/video output jacks of the satellite system.

3Connect the OUTPUT (VIDEO/L/R) jacks on the recorder and the audio/video input jacks of the TV.

4Connect the RF OUT (TO TV) terminal on the recorder and the antenna input connector of the TV.

You will need to:

•set “Cable Box/DBS” of “Set Top Box setting” to

“C.Box”. page 42

•set “Select Input” of “Set Top Box setting” to “Line1”.

page 42

You can control satellite channels from the recorder. Perform the below.

1)Connect the supplied IR cable to the CHANNEL

CHANGE IR jack of the recorder. page 25

2)Set “IR control” of “Set Top Box setting” to “On”.

page 42

24