Toshiba RD-XS52SC, RD-XS52SU, RD-KX50SU Connecting to aTV equipped with component video inputs

Connections

Connecting to aTV equipped with component video inputs

If your TV has component video inputs, you can obtain pictures in better quality.

To PB VIDEO OUT
To Y VIDEO OUT			To PR VIDEO OUT
						HDMI OUTPUT			RF IN
									(FROM ANT.)
DIGITAL AUDIO	Y	PB	PR	R	L	VIDEO	S-VIDEO
OUTPUT
BITSTREAM/PCM			COMPONENT OUTPUT				INPUT1		RF OUT
									(TO TV)
			OUTPUT				INPUT3		CHANNEL
OPTICAL R		L	VIDEO S-VIDEO	R	L	VIDEO	S-VIDEO	IR	CHANGE
									VHF / UHF

(red) (white)

Audio cable (not supplied)

To audio inputs of the

amplifier

(red) (white)

TV or monitor equipped with component video (INTERLACED/ PROGRESSIVE) inputs

Video cable (not supplied)

To PR video input

To PB video input

To Y video input

Component video outputs/inputs

Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy higher quality picture playback.

Actual labels for component video inputs may vary depending on the TV manufacturer. (ex.Y, R-Y, R-B or Y, CB, CR)

In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.

•Make the following setting.

On-screen display	Select	Page
“Audio out select”	“Analog 2ch”	page 48

Notes

To switch the output signal (Progressive/Interlaced) PROG/HDMI Press PROG/HDMI button to change the video output signals (progressive and

interlace) from COMPONENT OUTPUT jacks. Change the output signals as shown on the HDMI indicator on the front panel.

	HDMI indicator		Video output signal
Press
	illuminates “	1080i”	480p (progressive)
		Press
	illuminates “	720p”	480p (progressive)
		Press
	illuminates “	480p”	480p (progressive)
		Press
	off		480i (interlace)

•Refer to the owner’s manual for the TV to be connected to this recorder for more information concerning an audio system.

•If you place the recorder near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the recorder away from the tuner and radio.

•The output sound of the recorder has a wide dynamic range. Be sure to adjust the audio amplifier’s volume to a moderate listening level. Otherwise, the speakers and your hearing may be damaged by sudden high volume sound.

•Turn off the amplifier before you connect or disconnect the recorder’s power cord. If you leave the amplifier power on, the speakers may be damaged.

•PROG/HDMI button is not available during the operations below.

-All HDD title delete, HDD format, DVD-RAM physical format, DVD format, TIME SLIP (Pause TV/Chase Play), Rate conversion dubbing (Only when copying is in progress.), DVD-Video creation (EDIT MENU) (Only when copying is in progress.) (PROG/HDMI button may not be available during some other operations either.)

28