Toshiba RD-XS52SU, RD-XS52SC, RD-KX50SU owner manual Connect to a TV equiped with audio/video inputs

3 Connect to a TV equiped with audio/video inputs.

Connect as below for watching received channels or recorded contents. Watching via the RF OUT terminal is not available.

						HDMI OUTPUT			RF IN
									(FROM ANT.)
DIGITAL AUDIO	Y	PB	PR	R	L	VIDEO	S-VIDEO
OUTPUT
BITSTREAM/PCM			COMPONENT OUTPUT				INPUT1		RF OUT
									(TO TV)
			OUTPUT				INPUT3		CHANNEL
OPTICAL	R	L	VIDEO S-VIDEO	R	L	VIDEO	S-VIDEO	IR	CHANGE
									VHF / UHF

Introduction

(red)	(white)	(yellow)	To OUTPUT
			(S-VIDEO)

To OUTPUT	To OUTPUT	S-Video cable (not supplied)
(R/L)	(VIDEO)	If the TV has an S-video input, connect the recorder
		with an S-video cable. When using an S-video
		cable, do not connect the yellow video cable.
Video/audio cable (supplied)				TV or monitor with
		To S-video input		audio/video inputs
	To video inputs		(yellow)
			(white)
		To audio input	(red)

4 Connect the power cord of the recorder to a wall outlet.

Make sure that the powered recorder lights the ON/STANDBY indicator on the front panel.

To wall outlet

Notes

•Refer to the owner’s manual of the connected TV as well.

•When you connect the recorder to your TV, be sure to turn off the power and unplug both units from the wall outlet before any connections.

•If your television set has one audio input, connect the left and right audio outputs of the recorder to a Y cable adapter (not supplied) and then connect to your TV.

•Connect the recorder directly to your TV. If you connect the recorder to a VCR, TV/VCR combination, video selector or AV amplifier, the playback picture may be distorted due to copy protection.

Connections

Basic Setup

21