Toshiba RD-XS52SU, RD-XS52SC, RD-KX50SU owner manual Audio setting for the Hdmi connection

Set the output resolution for the HDMI output that best matches your TV’s capabilities

Set an output signal from the HDMI terminal of the recorder in accordance with your TV’s input signal.

				Pressing PROG/HDMI button on the front panel or the
				remote control changes output signals as below. See
				the HDMI indicator and select the appropriate output
				signal.
ON / STANDBY	CH	INPUT SELECT REC MODE	DIMMER PROG/HDMI		HDMI indicator		Video output signal
				Press	illuminates “	1080i”	1080i (interlace)
PROG/HDMI button			HDMI indicator			Press

illuminates “ 720p” 720p (progressive)

PROG/HDMI Press

Front panel

illuminates “ 480p” 480p (progressive)

Remote control PROG/HDMI Press

off 480i (interlace)

480p, 720p and 1080i are signals created with this recorder from original 480i signal. The resolution of the picture may not be increased even if they are selected.

Note

•PROG/HDMI button is not available during the operations below.

- All HDD title delete	- TIME SLIP (Pause TV/Chase Play)
- HDD format	- Rate conversion dubbing (Only when copying is in progress.)
- DVD-RAM physical format	- DVD-Video creation (EDIT MENU)
- DVD format	(Only when copying is in progress.)

(PROG/HDMI button may not be available during some other operations either.)

Introduction

Connections

Basic Setup

Audio setting for the HDMI connection

The HDMI connection will only output “PCM”.

Set “Audio out select” of “Picture/Audio setting” to “PCM” ( page 48).

Note

•When the HDMI connection is used, “Black level”, “Custom picture select” and “Custom picture setting” of “Picture/Audio settings” are not available.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

27