Toshiba RD-XS55KU owner manual 151, Setting up the PC when directly connecting to the PC

3: Setting up the PC

Introduction

Settings for the PC will be different depending on the operating system. Please read the user’s manual of your PC for details. The following instructions are for Windows® XP.

When using the PC with an always-on internet connection, the setting is normally already at “Auto” (automatically obtained IP address). Therefore, no change in setting is required. Proceed to “4: Starting Network Navi”. If “Network Navi” does not start, change the setting for the recorder according to the setting of the PC “TCP/IP properties”.

Recording

Setting up the PC (when directly connecting to the PC)

1“Control panel” → “Network connections” → click “Properties” of “Local area connection” → click “Properties” of “Internet protocol (TCP/ IP)”.

Select “Use next IP address” to set the IP address and subnet mask.

When setting has been previously established, keeping a record of the original setting prior to any changes is recommended so that it can be changed back.

Notes

•If you are connected to the internet, you may not be able to connect if you specify the IP address. Change to the original settings when connecting to the internet.

•When using Mac OS X, open “Apple Symbol” → “System environment setting” → “Network” → “TCP/IP”. Set the setting method to “Manual input” and enter the IP address and subnet mask.

Playback

Editing

q w

1 “IP address”:

Set to 192.168.1.10.

(Set an IP address that should be different from that of the recorder.)

2 “Subnet mask”:

Set to 255.255.255.0.

2Click “OK” on the screen.

After clicking “OK”, follow the instructions on the PC. It may be necessary to restart your PC.

Proceed to “4: Starting Network Navi”.

Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.

Library Network Navi Function setup Others

151