Toshiba RD-XS55KU owner manual 183, DVD recorder operation

Instant replay interval

HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD CD

Sets how far back is replayed when INSTANT REPLAY button is pressed.

5 sec. : 10 sec. : 30 sec. : 5 min.

Title thumbnail point

HDD DVD-RAM DVD-RW DVD-R

For recorded titles, sets how far a scene from the start is set as the title thumbnail.

0 sec. : 3 sec. : 10 sec. : 35 sec. : 1 min. : 5 min.

Note

•Thumbnails can also be changed to other scenes.

See page 126.

HDD/RAM title play

HDD DVD-RAM

Sets the resume play per title.

Title resume:

Remembers the point where you stop playback. Allows you to resume the playback from that point.

Serial playback:

You can play back titles (Original, Playlist) stored in the HDD or a DVD-RAM continuously.

Because there is no division between titles, the recorder remembers only the last point where you stopped playback.

Still group interval

DVD-RAM

Sets an interval for display of still pictures (in seconds) when playing back a collection of still images.

1 sec. : 2 sec. : 3 sec. : 5 sec. : 10 sec. : Default

Priority contents

To select the playback priority between JPEG (picture) files and MP3/WMA (audio) files.

Photo: JPEG files take priority over MP3/WMA files.

Audio: MP3/WMA files take priority over JPEG files.

Note

•If this selection does not correspond to disc contents, the recorder will take a longer time to start playback of the disc.

DVD recorder operation

User record quality

HDD DVD-RAM DVD-RW DVD-R

You can select from 5 combined picture and sound quality recording settings prior to actual recording. Actual selection applied becomes the default setting for normal recording or programmed recording.

e.g.	User record quality
	HDD	Setting 1	DVD		– – –
	Manual 6.6 L-PCM		SP	4.6		D/M1
	Custom setting
	Setting	Mode	Rate	Audio quality
	1	Manual	6.6		L-PCM
	2	SP	4.6		D/M1
	3	LP	2.2		D/M1
	4	Manual	6.0		D/M2
	5	Manual	3.2		D/M1
	Total recording time: approx. 71min.
		(with 4.7 GB unused)

•To make a combination of picture and sound quality settings.

1)Press / / / buttons to select the desired item (“Mode”, “Rate”, or “Audio quality”).

2)Press ADJUST button to change the setting of each item.

•To apply the combination of picture and sound quality settings.

1)Press / / / buttons to select a media to record on (HDD or DVD).

2)Press ADJUST button to change the setting.

You can confirm the available recording time for the selected setting on the bottom screen.

3)Press ENTER button.

Notes

•A combination of picture and sound quality settings can be set for the HDD and a DVD-RAM disc respectively.

•You can change the combination of picture and sound quality settings also by displaying Quick Menu on LIBRARY MENU or in stop mode, then selecting “User record quality”. Either of the above methods updates the setting of this recorder.

•If you set “SP” or “LP”, you cannot select “L-PCM”.

•Depending on the sound quality settings, the upper limit for the picture quality setting differs.

•You can adjust the manual rate for picture quality by

0.2 Mbps from 2.0 to 9.2. (You cannot set the rate from 1.0 to 2.0.)

Introduction RecordingPlayback

Editing

LibraryNetwork Navi Function setup Others

183