Toshiba RD-XS55KU owner manual 109, Check the rate for picture and sound quality

5 Check the rate for picture and sound quality.

To change the setting, perform the following steps.

1)Press QUICK MENU button to display Quick Menu.

2)Press / buttons to select “User record quality” and press ENTER button.

3)Press ADJUST ( / ) button to select the setting number

and press ENTER button.

When “Copy” on the bottom shows “X”, the selected parts are beyond the disc capacity. Change the rate for picture and sound quality or reduce parts to dub.

6 Press / to select “Start”, and select “Yes”, then press ENTER.

Introduction RecordingPlayback

ENTER

Copying starts.

To confirm the job progress, press TIME BAR button to display the time bar. (The time bar cannot be copied.) When copying is completed, the buzzer sounds and the current broadcast picture appears.

Pictures and sounds displayed during copying are for monitoring purposes only. Recorded picture quality may vary.

Editing

Cancelling dubbing during rate conversion dubbing

1)Press QUICK MENU.

2)Press / to select “Cancel dubbing”.

3)Press ENTER.

Note

•A portion of content from the start of recording to the moment you cancel dubbing will be copied.

Turning off the power automatically after dubbing

1)While dubbing, press QUICK MENU.

2)Press / to select “Auto power off”.

3)Press ENTER.

Notes

•Unlike High speed dubbing, Rate conversion dubbing may cause slight deterioration in picture and sound quality of recorded content. The time required for dubbing is about the same as the playback time of the content.

•Quality will not be improved even if you select a rate higher than original content.

•Rate conversion dubbing to the same DVD-RAM/R/RW disc is not possible.

•The recorder automatically inserts a black picture for a moment before and after the new title produced by this recording process.

•You cannot use the Rate Conversion Dubbing for copying from a DVD-RAM disc to another DVD-RAM disc.

•During Rate conversion dubbing, the relay recording

function ( page 185) is disabled even if “Relay Recording” is set to “On”.

•During Rate conversion dubbing, switching the audio channel is not possible.

•Audio processed under the Rate conversion dubbing is recorded in stereo.

•When you record an SAP program and play it back, the main and sub sound are output at the same time. Select the sound by pressing AUDIO button.

•When you set “DVD compatible Mode” to “Main” or “SAP”

( page 184), only a selected sound (the main or sub sound) of the SAP program is recorded. (Stereo broadcasting is recorded as stereo).

•If you perform the Rate conversion dubbing for a Playlist, containing a chapter that is the beginning of the Original title at recording, one frame at the beginning will be removed.

•During Rate conversion dubbing, P in P function ( page 70) is disabled.

•Rate conversion dubbing to DVD-R/RW selects aspect ratio according to the first title of dubbed items.

•Each part, when selected, shows its name at the bottom of the menu for about 2 seconds.

LibraryNetwork Navi Function setup Others

109