Toshiba RD-XS55KU owner manual 179, Picture/Audio settings

Picture/Audio settings

Pause/Still

HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO

Auto:

Normal setting. Pause the moving image without blurring.

Frame:

Displays high resolution still image.

Output Black level

HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD

You can adjust the black level of the output signal.

Standard:

Normal black level.

Enhanced:

To display deeper, richer black than in “Standard” setting.

Note

•This function is not available when the HDMI connection is used.

Custom picture select

HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD

Select from between 4 picture settings (Normal, Setting 1-3) you stored in the memory.

Note

•This setting is not available when the HDMI connection is used.

Custom picture setting

HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD

You can adjust fine picture quality and store up to 3 custom picture settings in the memory of the recorder.

1)Press / button to select a desired setting from 3 settings, and then press ENTER button.

e.g.

Picture/Audio settings
Pause / Still	Auto	Setting 1
Output Black level	Standard	Setting 2
Custom picture select	Normal	Setting 3
Custom picture setting
Progressive conversion	Auto
Play DNR
Audio out select	Bitstream
Virtual surround	Off
SAP	Off

2)Press / buttons to select adjustable items, and then press / buttons to select each parameter.

Brightness

(0)Darker ⇔ Brighter (14)

Contrast

(–7) Lower ⇔ Higher (7)

Color

(–7) Duller ⇔ Brighter (7)

Tint

(–7) Red ⇔ Green (7)

Edge Enhance Soft/OFF/Sharp

Gamma OFF/1/2

3)After adjusting the items, press ENTER button.

Note

•This setting is not available when the HDMI connection is used.

Progressive conversion

HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD

There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second). Make this selection according to the type of content being viewed.

Auto:

Select this position normally.

The DVD player automatically detects source content, film or video, of playback source, and converts that signal in the progressive output format in an appropriate method.

Video:

The DVD player filters video signal, and converts it in the progressive output format appropriately.

Suitable for playback of video content pictures.

Film:

The DVD player converts film content pictures in the progressive output format appropriately.

Suitable for playback of film content pictures.

The progressive output feature will be most effective under this selection.

Note

•Depending on a disc, pictures may be cut off or doubled.

179

Introduction RecordingPlayback

Editing

LibraryNetwork Navi Function setup Others