Pioneer DEH-P3100UB Initial Settings, Activating the BT Audio source, Switching the ever scroll

Initial Settings

Section

04

1 Use MULTI-CONTROL to select

SW CONTROL in the initial setting menu. Refer to Adjusting initial settings on the pre- vious page.

2Press MULTI-CONTROL to display the

setting mode.

# Press DISP/BACK/SCRL to return to the pre- vious display.

3Use MULTI-CONTROL to select the de- sired setting.

Press to switch the segment you wish to set between left and right. Turn to change the set- ting of each segment.

Left segment	Right segment
REAR SP	FULL (full-range speaker)
(rear speaker setting)	SUB W (subwoofer)
PREOUT	SUB W (subwoofer)
(RCA output setting)	REAR (full-range speaker)

1 Use MULTI-CONTROL to select

EVER SCROLL in the initial setting menu. Refer to Adjusting initial settings on the pre- vious page.

2Press MULTI-CONTROL to turn the ever

scroll on.

# To turn the Ever Scroll off, press MULTI-CONTROL again.

Activating the BT AUDIO source

You need to activate the BT AUDIO source in order to use a Bluetooth audio player.

!You can only operate this function when Bluetooth adapter (e.g. CD-BTB200) is con- nected to this unit.

1Use MULTI-CONTROL to select BT AUDIO in the initial setting menu. Refer to Adjusting initial settings on the pre- vious page.

English

#When you select REAR SP :SUB W, you can not set PREOUT (RCA output setting).

Notes

!Even if you change this setting, there is no output unless you turn the subwoofer output on (refer to Using subwoofer output on page 24).

!If you change this setting, subwoofer output in the audio menu will return to the factory settings.

!Both rear speaker lead outputs and RCA rear

output are switched simultaneously in this setting.

Switching the ever scroll

When Ever Scroll is set to ON, recorded text in- formation scrolls continuously in the display. Set to OFF if you prefer the information to scroll just once.

2Press MULTI-CONTROL to turn the

BT AUDIO source on.

# To turn the BT AUDIO source off, press MULTI-CONTROL again.

Entering PIN code for Bluetooth wireless connection

To connect your cellular phone or audio player to this unit via Bluetooth wireless technology, you need to enter PIN code on your phone or audio player to verify the connection. The de- fault code is 0000, but you can change this in this function.

!You can only operate this function when Bluetooth adapter (e.g. CD-BTB200) is con- nected to this unit.

!With some Bluetooth audio players, you may be required to enter the Bluetooth audio player PIN code in advance to set this unit for a connection.

En 27