#Youcan also perform the same operations by
pushingMULTI-CONTROL up or down.
Note
Youcan also switch to this setting mode in the
menuthat appears by using
MULTI-CONTROL.
Using the high pass filter
Whenyou do not want low sounds from the
subwooferoutput frequency range to play
fromthe front or rear speakers, turn on the
HPF(high pass filter). Only frequencies higher
thanthose in the selected range are output
fromthe front or rear speakers.
1 UseMULTI-CONTROL to select
HIGHPASS FILTER.
2 PressMULTI-CONTROL to display the
settingmode.
3 UseMULTI-CONTROL to select the de-
siredsetting.
Turnto change the setting.
OFF50HZ63HZ80HZ100HZ125HZ
#Youcan also perform the same operations by
pushingMULTI-CONTROL up or down.
4 PressMULTI-CONTROL to determine
theselection.
#Evenif the menu has been cancelled before
determination,operation is settled.
Boosting the bass
Bassboost function boosts the bass level of
sound.
1 Pressand hold SW/BASS to display
BASSBOOST setting mode.
2 TurnMULTI-CONTROL to adjust the
level.
0to+6 is displayed as the level is increased or
decreased.
#Youcan also perform the same operations by
pushingMULTI-CONTROL up or down.
3 PressMULTI-CONTROL to determine
theselection.
#Evenif the menu has been cancelled before
determination,operation is settled.
Note
Youcan also switch to this setting mode in the
menuthat appears by using
MULTI-CONTROL.
Adjusting source levels
SLA(source level adjustment) lets you adjust
thevolume level of each source to prevent ra-
dicalchanges in volume when switching be-
tweensources.
!Settingsare based on the FM volume level,
whichremains unchanged.
1 Comparethe FM volume level with the
levelof the source you wish to adjust.
2 UseMULTI-CONTROL to select
SRCLV ADJUST in the audio function menu.
3 PressMULTI-CONTROL to display the
settingmode.
4 TurnMULTI-CONTROL to adjust the
sourcevolume.
+4to 4is displayed as the source volume is
increasedor decreased.
#Youcan also perform the same operations by
pushingMULTI-CONTROL up or down.
5 PressMULTI-CONTROL to determine
theselection.
#Evenif the menu has been cancelled before
determination,operation is settled.
Note
TheAM volume level can also be adjusted with
sourcelevel adjustments.
Audio Adjustments
En 25
English
Section
03