Pioneer DEH-P3100UB Audio Adjustments Introduction of audio, Using balance adjustment

Section
03		Audio Adjustments
	Introduction of audio		! When selecting FM as the source, you cannot
	adjustments		switch to SRC LV ADJUST.
			! If you do not operate functions within about
	1 Press MULTI-CONTROL to display the		30 seconds, the display automatically returns
	main menu.		to the ordinary display.
	2 Use MULTI-CONTROL to select AUDIO.
	Turn to change the menu option. Press to se-		Using balance adjustment
	lect.
			You can change the fader/balance setting so
	3 Turn MULTI-CONTROL to select the
			that it can provide the ideal listening environ-
	audio function.		ment in all occupied seats.
	Turn MULTI-CONTROL to switch between the		1 Use MULTI-CONTROL to select
	audio functions in the following order.
	FADER/BALANCE (balance adjustment)—		FADER/BALANCE in the audio function
	PRESET EQUALIZER (equalizer recall)—		menu.
	EQ SETTING 1 (equalizer adjustment)—		2 Press MULTI-CONTROL to display the
	EQ SETTING 2 (equalizer fine adjustment)—
			setting mode.
	LOUDNESS (loudness)—SW SETTING 1 (sub-
	woofer on/off setting)—SW SETTING 2 (sub-		3 Press MULTI-CONTROL to select the seg-
	woofer setting)—HIGH PASS FILTER (high
			ment you wish to set.
	pass filter)—BASS BOOST (bass boost)—
			Press MULTI-CONTROL repeatedly to switch
	SRC LV ADJUST (source level adjustment)
			between fader and balance.
	4 Press MULTI-CONTROL to display the		4 Turn MULTI-CONTROL to adjust speaker
	setting mode of each function.
			balance.
	# Push MULTI-CONTROL left to display the
			Front/rear speaker balance can be adjusted
	function selection menu.
			between FAD F15 and FAD R15.
	# Push and hold MULTI-CONTROL left to dis-
			Left/right speaker balance can be adjusted be-
	play the main menu.
			tween BAL L15 and BAL R15.
	5 Adjust the each function.		# You can also perform the same operations by
			pushing MULTI-CONTROL up or down.
		Notes	# FAD 0 is the proper setting when only two
			speakers are used.
	! To return to the previous display, press
			# When the rear output setting is
		DISP/BACK/SCRL.	REAR SP :SUB W, adjusting the front/rear speak-
	! To return to the main menu, press and hold		er balance is not effective. Refer to Setting the
		DISP/BACK/SCRL.	rear output and subwoofer controller on page
	! To return to the ordinary display, press		26.
		BAND/ESC.
	! When the subwoofer controller setting is
		PREOUT:REAR, you cannot switch to	Using the equalizer
		SW SETTING 1 (subwoofer on/off setting).
			The equalizer lets you adjust the equalization
		(Refer to page 26.)
	! You can select the SW SETTING 2 only when		to match the car’s interior acoustic character-
		subwoofer output is turned on in	istics as desired.
		SW SETTING 1.

22 En