Pioneer DEH-P3100UB Sirius Satellite Radio tuner, Switching the XM channel select mode

Section

06Available accessories

#If you do not operate the list within about 30 seconds, the display is automatically returned to the ordinary display.

Note

You can also recall stations assigned to preset tuning numbers by pushing MULTI-CONTROL up or down during the channel display.

Switching the XM channel select mode

You have two methods for selecting a channel: by number and by category. When selecting by number, channels in any category can be selected. Select by category to narrow your search down to only channels in a particular category.

%Press S.Rtrv/SAT repeatedly to select the desired channel select setting.

MODE CH NUMBER (channel number select setting)—MODE CATEGORY (channel cate-

gory select setting)

# If you do not operate the function within about eight seconds, the display is automatically re- turned to the channel display.

Note

You can also perform this operation in the menu that appears by using MULTI-CONTROL.

Selecting a channel in the channel category

1Select the channel select settings to

MODE CATEGORY.

Refer to Switching the XM channel select mode on this page.

2Push MULTI-CONTROL up or down to select the desired channel category.

3Push MULTI-CONTROL left or right to select the desired channel in the selected channel category.

Displaying the Radio ID

Channel number select setting

1Select the channel select settings to

MODE CH NUMBER.

Refer to Switching the XM channel select mode on this page.

2Push MULTI-CONTROL left or right to

select RADIO ID.

# If you select another channel, display of the ID

code is canceled.

# Display of the ID code repeats displaying RADIO ID and the ID code one after the other.

SIRIUS Satellite Radio tuner

Listening to SIRIUS Satellite Radio

You can use this unit to control a SIRIUS Satel- lite Radio tuner, which is sold separately. When the SIRIUS tuner is used together with this unit, some operations differ slightly from those described in the SIRIUS operation man- ual. This manual provides information on these points. For all other information on using the SIRIUS tuner, please refer to the SIR- IUS operation manual.

%Selecting a SIRIUS band

Band can be selected from SR1, SR2 or SR3.

%Selecting a channel

Push MULTI-CONTROL left or right.

#If you push and hold MULTI-CONTROL left or right, you can increase or decrease channel num- ber continuously.

#You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel category on page 42.)

Note

It may take a few seconds before you can hear anything while this unit acquires and processes the satellite signal when you change the source to SIRIUS tuner or select a channel.

40 En