Pioneer DEH-P3100UB operation manual Displaying system version Bluetooth adapter for repair

Section
04		Initial Settings
	1 Use MULTI-CONTROL to select		System version—Bluetooth module ver-
	PIN CODE INPUT in the initial setting menu.		sion
	Refer to Adjusting initial settings on page 26.		# You can also perform the same operations by
	2 Press MULTI-CONTROL to display the		pushing MULTI-CONTROL up or down.
	setting mode.
	# Press DISP/BACK/SCRL to return to the pre-
	vious display.
	3 Turn MULTI-CONTROL to select a num-
	ber.
	# You can also perform the same operations by
	pushing MULTI-CONTROL up or down.
	4 Press MULTI-CONTROL to move the cur-
	sor to the next position.
	# You can also perform the same operations by
	pushing MULTI-CONTROL right.
	5 After inputting PIN code (up to 16 di-
	gits), press and hold MULTI-CONTROL.
	PIN code can be stored in memory.
	Displaying system version of
	Bluetooth adapter for repair
	Should this unit connecting Bluetooth adapter
	fails to operate properly and you consult your
	dealer for repair, you may be asked to indicate
	the system version and Bluetooth module ver-
	sion of the adapter. You can display the ver-
	sions and confirm them.
	! You can only operate this function when
		Bluetooth adapter (e.g. CD-BTB200) is con-
		nected to this unit.
	1 Use MULTI-CONTROL to select
	BT VER INFO in the initial setting menu.
	Refer to Adjusting initial settings on page 26.
	2 Press MULTI-CONTROL to display the
	setting mode.
	# Press DISP/BACK/SCRL to return to the pre-
	vious display.
	3 Use MULTI-CONTROL to select the de-
	sired version.
	Turn to switch the version.

28 En