Toshiba SD-260SY TV Shape, TV System, Video Output, Customizing the Function Settings continued

Function setup

Customizing the Function Settings (continued)

Setting details

Video

TV Shape		DVD
1)	Press / to select the Video.
2)	Press ENTER.
3)	Press ENTER button, then press the / to
	shift and change the TV type.

4)Press ENTER.

5)Press RETURN.

TV System

1)	Press	/	to select the Video.
2)	Press ENTER.
3)	Press		/ to select the TV system.
4)	Press ENTER button, then press / to shift
	and change the TV system

5)Press ENTER.

6)Press RETURN.

4:3 Pan Scan

PAL NTSC

Composite PAL

Auto

4:3 Pan Scan:	Select when a standard 4:3 TV is
	connected.
	Displays pictures cropped to fill
	your TV screen. Either or both
	sides of the picture are cut off.
4:3 Letter Box:	Select when a standard 4:3 TV is
	connected.
	Displays theatrical images with
	masking bars above and below the
	picture.

16:9 Wide : Select when a 16:9 TV is connected.

Notes

•The displayable picture size is preset on the DVD video disc. Therefore, the playback picture of some DVD video discs may not conform to the picture size you select.

•When you play DVD video discs recorded in the 4:3 picture size only, the playback picture always appears in the 4:3 picture size regardless of the TV shape setting.

•If you select “16:9 Wide” and you own a 4:3 TV set, the DVD playback picture will be horizontally distorted during playback. Images will appear to be horizontally compressed. Always be sure that your TV shape conforms to the actual TV in use.

NTSC:	Select if your TV system is NTSC.
PAL:	To play a PAL disc. Connect a PAL TV to
	view a picture.
Auto:	The DVD video player automatically
	identifies PAL or NTSC video system of a
	disc. Connect a multisystem TV (PAL/
	NTSC compatible) to view a picture.
	A playback picture may be distorted when
	detected a signal change between PAL and
	NTSC on the disc.
	For the case of Progressive mode, your
	multisystem TV must be able to support
	525p.

Video Output

1)	Press	/	to select the Video.
2)	Press ENTER.
3)	Press		/ to select the Video Output.
4)	Press ENTER button, then press / to select
	the output mode.

5)Press ENTER.

6)Press RETURN.

Composite: Select if you connect the DVD to TV via composite video (yellow) input or S-VIDEO input.

Component: Corresponding to your TV which has a component video inputs. Progressive mode can only be on when component is selected.

Note

At component mode, there is no S-VIDEO output.

54