Toshiba SD-36VESE Press the … or † button to select Auto Setup, Then press the OK or √ button

Press the … or † button to select Auto Setup,
3 then press the OK or √ button.
The Country Selection menu is displayed.
Press the œ/√, …/† buttons to select your
country.
				Country Selection
	A	NL	S		PL
	B	I	CH		CZ
	DK	N	TR		Others
	FIN	P	GR
	D	E	HU
		OK		RETURN MENU

•Refer to following abbreviation table when selecting “Country”.

A(Austria)	NL(Netherlands) S(Sweden) PL(Poland)
B(Belgium)	I(Italy)	CH(Swiss) CZ(Czech)
DK(Denmark)	N(Norway)	TR(Turkey) Others
FIN(Finland)	P(Portugal)	GR(Greece)
D(Deutschland) E(Spain)		HU(Hungary)

5	Press the OK button to start the auto scanning.
	The message Please Wait is displayed.

	Auto Setup
Please Wait
	10%
√√
RETURN	MENU

•The first frequency band is scanned and the first station found is displayed and stored. Then the DVD-VCR searches for the second station and so on.

When the automatic scanning procedure has finished, the DVD-VCR switches automatically to programme 1.

•If you wish to cancel the auto scanning before the end, press the MENU button.

Settings

4	Press the OK button.
	A message is displayed, indicating that any

channels already preset on your DVD-VCR will be deleted.

Auto Setup

Your data will be lost

Press OK to continue

MENU to exit

OK RETURN MENU

Note

The number of stations automatically stored by the DVD-VCR depends on the number of stations that it has found.

The time and date are set automatically from the broadcast signal. If the signal is weak or ghosting occurs, the time and date may not be set automatically. In this case, they should be set manually (refer to page 16).

Once the auto scanning procedure has finished, some stations may have been stored more than once; select the stations with the best reception and delete the ones no longer required (refer to page 18).

English - 17