Toshiba SD-36VESE AV2 in By means of 21-pin Scart Cable, Aveuro AV By means of 21-pin Scart

Connections

Connecting DVD-VCR to a Satellite Receiver or Other Equipment

You can connect your DVD-VCR to a Satellite receiver or other DVD-VCR using the SCART cable if the appropriate outputs are available on the equipment chosen. The following illustrations give a few examples of the connection possibilities.

1	AV2 IN: By means of 21-pin Scart Cable
	Plug the SCART Cable with satellite receiver or
	other equipment into the AV2 (DEC./EXT.) jack
	on the rear of the DVD-VCR.
	After making this connection, select the source
	by pressing the INPUT SEL. button for the AV2
	input sources.
2	AV(EURO AV) : By means of 21-pin Scart
	Cable
	Connect the end of the SCART cable to the
	AV1(EURO AV) jack on the rear of the DVD-
	VCR. Plug the other end into the appropriate
	connector on the television. When using the
	SCART cable, set the TV to audio/video mode
	(AV).
3	By means of RF Cable
	After making this connection, you must preset

the station received through the satellite tuner. RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the DVD-VCR, e.g. re-adjust to channel 33.

Aerial

Satellite Receiver or other Equipment

Aerial cable

2

Connecting DVD-VCR to the TV using the Audio/Video Cable

You can connect your DVD-VCR to the television using the audio/video cable if the appropriate input is available on the television.

1	Connect one end of the video cable into the
	VIDEO output jack on the rear of the DVD-VCR.

2 Plug the other end of the video cable into the appropriate input connector on the television.

3 Connect one end of the audio cable supplied into the AUDIO output jacks on the rear of the DVD- VCR.

•Take care to respect the colour coding of the left and right channels.

4 Plug the other end of the audio cables into the appropriate input connectors on the television.

3

1

TV

1

4

3

SCART Cable

(not supplied)

RF cable

2

10 - English