English
- 19
Settings
Clearing a PresetStation
If you have stored a TV station:
That you do not require
At the wrong programme position, you can cancel it.
1Press the MENU button, then press the OK or
button.
2Press the or button to select Install, then
press the OK or button.
The Install menu is displayed.
3Press the or button to Select Manual
Setup, then press the OK or button.
The TV STATION TABLEmenu is displayed.
4Press the or button to select required
preset TV station.
Press the CLEAR button to delete.
5Repeat the same procedure from step 4
onwards until all the required stations have
been cleared.
SETUP
DVD
VCR
PROG
FUNC
Install
Auto Setup
Manual Setup
TV System :G
VCR Output CH :CH36
OK RETURN MENU
❉ ❉ TV STATION TABLE ❉ ❉
PR CH NAME DEC
1 021 - - - - OFF
2
3
4
5
SWAPPING : OK
DELETE : CLEAR RETURN
8Press the or button to select NAME.
The station name is set automatically from the
broadcast signal.
•To change the programme’s name, press the
button. The first letter of the name flashes.

9

10

Repeat this procedure from step 4onwards,
until all the required stations have been stored.

11

Press the MENU button to exit the menu.
❉ ❉ MANUALTUNING ❉ ❉
PR : 1
CH : 021
MFT : -
DECODER : OFF
NAME : - - - -
œœ
MEMORY: OK
RETURN
Select a character
in the name
Move to the next
previous or
character
Press the ,button until the
required character is displayed
(letters, numbers or “-” character).
Press the œorbutton
respectively.
To... Then...
If you... Then...
Wish to store the
station displayed
Do not wish to
store the station
displayed
Press OK to store the station.
Press the orbutton until the
CH is selected.
Press the œorbutton to go on
scanning the frequency band and
display the next station.