Toshiba SD-P2600 Switching the output signal, Interlaced outputs/inputs ColorStream, To Y green

INTERLACED outputs/inputs (ColorStream®)

Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy higher quality picture playback.

Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR)

In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.

PROGRESSIVE outputs/inputs (ColorStream®Pro) Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video signal. Connecting to these inputs allows you to view the highest quality pictures with less flicker.

Connecting to an audio system and TV equipped with component video inputs

COMPONENT VIDEO	S VIDEO
BITSTREAM/PCM AV IN	AV OUT	DC IN 12V	Signal flow
To COMPONENT VIDEO		To AV OUT
			Audio system
		To audio inputs
		of the amplifier	(white)
		Audio cable
		(not supplied)	(red)
				TV equipped
				with component
			To CB (blue)	video inputs
	Component video cable
	(supplied)
			To CR (red)
Switching the output signal			To Y (green)
(INTERLACED/PROGRESSIVE)
Video signals of both interlace and progressive		When the AV OUT or BITSTREAM/PCM jacks are
scanning formats are output from the player’s
COMPONENT VIDEO connector. Press the MONITOR		connected to the audio input terminals of an audio
button on the main unit repeatedly and select the type		system, sounds of discs can be heard on the connected
of output signal according to the scanning format of the		audio system. For instructions on connections to audio
connected TV. 23		systems, see 82 .
MONITOR Select “External Interlaced” or “External			• Make the following setting.
			On-screen display	Select:	Page
Progressive”.
			“Audio Out Select”	“Bitstream”	66
				or	69
				“PCM”

Notes

•Refer to the owner’s manual of the connected equipment as well.

•When you connect the player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

•If you place the player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the player away from the tuner and radio.

•The output sound of the player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

•Turn off the amplifier before you connect or disconnect the player’s power cord. If you leave the amplifier power on, the speakers may be damaged.

Connections

79