Toshiba SD-P2600 manual Audio Out Select DVD-V DVD-A VCD CD

	ABC
Audio
PCM Down Sampling	Off
Audio Out Select	Bitstream
Dynamic Range Control On
Karaoke Vocal	Off

PCM Down Sampling DVD-VDVD-A

Make this selection only when you use your audio equipment (e.g. receiver) connecting to the player via the BITSTREAM/PCM (DIGITAL) AUDIO OUT jack.

According to performance of your connected receiver, select a sound processing option for playback of a disc that contains high frequency signals (sampling frequency 96 kHz or 88.2 kHz).

On: Select when your connected receiver does not conform to high frequency signals of 88.2 kHz or higher.

The player outputs these signals in a disc depressing the frequencies to 48 kHz or 44.1 kHz.

Off: Select when your connected receiver conforms to high frequency signals of 88.2 kHz or higher. The player outputs these signals in a disc as they are.

Notes

•Regardless of this setting, the player outputs high frequency signals in a copyright protected disc, depressing to 48 kHz or 44.1 kHz; and outputs those of 176.4 kHz or 192 kHz in a disc with no copyright protection, depressing to 88.2 kHz or 96 kHz.

•If you select “Off” while your connected receiver does not conform to high frequency signals of 88.2 kHz or higher, you cannot hear output sound of those signals.

Audio Out Select DVD-V DVD-A VCD CD

Select the output sound format corresponding to your system connection.

For details of sound recording systems, see 49 .

Bitstream:	Select when connected to an amplifier
	equipped with a Dolby Digital, DTS,
	MPEG1 or MPEG2 decoder. 82 83
	The player outputs digital audio
	information in the bitstream format
	when you play a DVD video disc
	recorded on the Dolby Digital, DTS,
	MPEG1 or MPEG2 recording system.
PCM:	Select when connected to a 2 channel
	digital stereo amplifier. 84
	The player outputs sounds in the PCM
	2ch format when you play a DVD video
	disc recorded on the Dolby Digital,
	MPEG1 or MPEG2 recording system.

Note

When you make a connection to a TV, or Dolby Pro Logic or stereo system via the analog audio jacks, select “Bitstream” or “PCM.”

Function setup

69