Basic playback
Playing a Disc
This section shows you the basics on how to play a disc.
indicates a reference page of this manual.
See the page in for details.
DVD-V DVD-A Basic playback
VCD CD
Preparations
•Connect the AC adapter 16 or the battery pack 61 to the player.
•When you want to view a disc on a connected TV or monitor
5455 , turn on the equipment and select the video input connected to the player.
•When you want to enjoy the sound of discs from an audio system 55 , turn the audio system on and select the input connected to the player.
•If you use the supplied remote control, make sure that batteries are loaded in it. 15
•If you use the headphones, see “Connecting to Headphones”. 56
•Press the open switch to open the LCD monitor.
Press the open switch to open the LCD monitor.
Do not forcibly open the LCD monitor to avoid damaging this panel.
1
2 | STOP |
|
TOP MENU
MENU
4
/ 
/
/ 
ENTER
CAUTION
•Keep your fingers clear of the disc as it is spinning. Neglecting to may cause serious personal injury.
•Be careful not to catch your fingers in the disc holder.
•Do not use a cracked, deformed, or repaired disc.
•Do not tilt, shake or move the main unit while playing. It may damage the disc.
1 Turn on the power.
Slide the power switch to “ON”.
The player turns on and the POWER/CHG indicator on the player illuminates in green.
2 Open the disc cover.
Press OPEN on the main unit.
The disc cover opens.
The disc cover will not open over a certain range. Do not force the cover open further, as it may cause damage to the player.
3 Set a disc.
Place a disc with the playback side down, and push gently on the center of the disc to affix it to the spindle.
4 Close the disc cover. Press CLOSE on the left corner.
18
