Toshiba SD-P2700 manual Dolby Digital, Dolby Surround Pro Logic

Connections

Connecting to Audio Equipment (continued)

Connecting to an amplifier equipped with a Dolby Digital decoder

Dolby Digital

Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Confidential Unpublished Works. © 1992- 1997 Dolby Laboratories, Inc. All rights reserved.

Amplifier equipped with a

Dolby Digital decoder

To digital audio input
(optical/coaxial)	To BITSTREAM/PCM

Coaxial cable or optical digital cable (not supplied)

•Use DVD video discs encoded via the Dolby Digital recording system.

•Make the following setting.

On-screen display	Select:	Page
“Audio Out Select”	“Bitstream”	46
		49
Recording system	Dolby Digital	41

Connecting to an amplifier equipped with Dolby Surround Pro Logic®

Dolby Surround Pro Logic®

You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic® by connecting an amplifier and speaker system (right and left front speakers, a center speaker, and one or two rear speakers).

With an amplifier equipped with Dolby Digital

Connect the equipment the same way as described in “Connecting to an amplifier equipped with a Dolby Digital decoder.” Refer to that amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.

With an amplifier not equipped with Dolby Digital

Connect the equipment as follows.

*	Amplifier equipped with
	Dolby Surround Pro Logic
	To analog audio input	To AV OUT

•Make the following setting.

On-screen display Select: Page

46

“Audio Out Select” “Analog 2ch”

49

Be sure to set “Audio Out Select” to “Analog 2ch” when you enjoy sounds of Dolby Surround Pro Logic using this connection.

*Connect one or two rear speakers.

The output sound from the rear speakers will be monaural even if you connect two rear speakers.

(yellow)

Audio/video cable (supplied)

58