Toshiba TDP-TW90A owner manual Connection, How to use the PC card slot, Before connection

Connection

Before connection

•Read the owner’s manual of the device you are connecting to the projector.

•Some types of computer cannot be used or connected to this projector. Check for an RGB output terminal, supported signal p.69 , etc.

•Turn off the power of both devices before connecting.

•The figure below is a sample connection. This does not mean that all of these devices can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)

How to use the PC card slot

The wireless LAN PC card enables you to connect the projector wirelessly with a personal computer that supports IEEE802.11g/b based wireless LAN. p.34 (Please note that communication between all the computers based on IEEE802.11g/b and this projector is not guaranteed.) You can also use a commercially available memory card to project JPEG image files using this projector. p.42 Please follow the steps below when removing or mounting a PC card.

■ Mounting a PC card	■ Removing a PC card
q Insert the PC card.	q Look at CARD indicator.

Computer (for control)						Audio amplifier, etc.
			VCR	Video recorder,
				DVD player, etc.
To		To audio output	To video	To audio output	To S-Video	To audio input
	p.71	White (L)/Red (R)	output	White (L)/Red (R)	output	White (L)/Red (R)
RS-232C
				Video cable
terminal
	Control cable		(not supplied)
						Audio cable (not supplied)
			AV cable	S-Video cable
			(not supplied)	(not supplied)

After making sure of the card orienta- tion, press it in firmly until it stops.

PC Card

When the PC card is detected correctly, the CARD indicator comes on in green.

If it is off, proceed to step r.

CARD indicator

UNMOUNT button

wPress the UNMOUNT button.

Begins processing for PC card removal.

eWait until CARD indicator goes out.

Never remove the PC card while lit. Doing so could damage the PC card or corrupt your data.

Preparations

	Audio cable			RGB cable
RGB cable	(not supplied)
			Audio cable	(supplied)
(not supplied)
		Monitor cable Mini	(not supplied)
To RGB		D-sub 15P-BNC		To RGB
		(not supplied)	To audio output	output
output
	To audio	To Y/CB/CR output
	output
		Green (Y)/Blue (CB)/Red (CR)
		Conversion adapter BNC-pin
		(not supplied)
Computer		DVD video recorder, etc.		Computer

rPress the Eject button.

Eject button

The Eject button is a bit stiff, so press firmly while supporting the projector. Be careful to avoid injury when doing so.

Notes

•COMPUTER terminals 1 and 2 function identically.

•The AUDIO IN terminal doubles for devices connected to COMPUTER terminals 1 and 2.

■If CARD indicator turns red

Press the RESET switch with a thin pin or similar implement (it is at the bottom of a recess).

CARD indicator

RESET switch

20 21