4 Replacement Procedures
Installing the Battery Pack
To install the battery pack in the battery bay, follow the steps below and refer to the figure in the
preceding section.
WARNING: The battery is a lithium ion battery and can explode if not properly replaced,
used, handled or disposed of. Use only batteries recommended by Toshiba as replacements.
1. Slide the battery pack into the battery bay. The battery bay latch will click automatically.
2. Lock the battery pack lock and battery pack release latch to secure the installation.
4.3 PC Card
Removing a PC Card
To remove a PC Card, follow the steps below.
1. Push the PC Card’s eject button. The button pops out when you release it.
2. Push the eject button once more to pop the PC Card out slightly.
3. Grasp the PC Card and remove it.
4. Push the eject button back into place, if necessary.
Eject button
Figure 4-2 Removing a PC Card
4-8 Tecra A3/S2 Series Maintenance Manual