Toshiba Tecra A3/S2 4.21 FL Inverter Board

4 Replacement Procedures
4.21 FL Inverter Board
Removing the FL Inverter Board
To remove the FL inverter board, first remove the battery pack, the display assembly, display
mask, and LCD module, then follow the step below.
1. Remove one black M2x3 screw securing the FL invert board to the LCD display assembly.
M2x3
Figure 4-39 Removing the FL inverter board
Installing the FL Inverter Board
To install the FL inverter board, follow the steps below and refer to the figure in the preceding
section.
1. Secure one black M2x3 screw connecting the FL inverter board to the LCD display
assembly.
2. Reassemble the computer.
4-44 Tecra A3/S2 Series Maintenance Manual