Toshiba Tecra A3/S2 - page 134

4 Replacement Procedures
1
2
M2.5X8 M2.5X8
Figure 4-22 Removing the wireless and LCD cables
7. Lift the display assembly from the computer’s chassis.
Installing the Display Assembly
To install the display assembly, follow the steps below and refer to the figures in the preceding
section.
1. Seat the display assembly taking care not to crush to the LCD cable or wireless cable.
2. Secure two M2.5x8 black screws to LCD hinge.
3. Connect the LCD cable to the top chassis.
4. Connect the wireless cable to the wireless module.
5. Connect the Bluetooth cable to the Bluetooth module.
6. Reinstall the strip cover and the keyboard.
7. Secure two black M2.5x8 screws on the back of the computer.
Tecra A3/S2 Series Maintenance Manual 4-27