4 Replacement Procedures
4.10 Bluetooth
Removing the Bluetooth
To remove a Bluetooth unit, follow the steps below.
1. Detach a FFC cable from motherboard.
2. Remove two black M2x3 screws.
3. Grasp the Bluetooth unit and remove it.
1
2
M2X3
Figure 4-19 Removing the Bluetooth
Installing the Bluetooth
To install a Bluetooth unit, follow the steps below and refer to the figures in the preceding
section.
1. Seat the Bluetooth module securing with two black M2x3 screws.
2. Connect the FFC cable to motherboard.
4-24 Tecra A3/S2 Series Maintenance Manual