Toshiba Tecra A3/S2 - page 21

1 Hardware Overview 1.2 System Unit
1-12 Tecra A3/S2 Series Maintenance Manual
• HRTF 3D positional audio.
• 3D Stereo Enhancement.
TI PCI7411 Card Bus Host Adapter
• 3.3V operation with 5V Tolerance
• The PCI7411 controller is availble in the 288-terminal MicroStar BGA
package(GHK).
• Compliant with
 PCI Local Bus Specification, Revision 2.3.
 PCI Bus Power Management Interface Specification Revision 1.1
 Windows Logo Program 2.0 compliant.
 Intel Mobile Power Guideline 2000.
 Advanced Configuration and Power Interface(ACPI) Specification,
Revision 2.0.
 PC 98/99 and PC2001.
 PC Card Standard 8.1.
 1394 Open Host Controller Interface Specification 1.1.
 Provisions of IEEE Std 1394-1995 for a high-performance serial bus and
IEEE Std 1394a-2000.
• Interrupt configuration
 Many interrupt modes supported.
 Supports serialized IRQ with PCI interrupts.
• Supports PC Card or CardBus with hot insertion and removal.
• Supports 132-MBps burst transfers to maximize data throughput on both the PCI
bus and the CardBus.
• Supports ring indicate , SUSPEND#, and PCI CLKRUN# protocols and PCI bus
Lock(Lock#).
• Fully interoperable with FireWire and i.LINK implementations of IEEE Std 1394.
• Two IEEE Std 1394a-2000 fully compliant cable ports at 100M bits/s, 200M bits/s,
and 400M bits/s.
• Universal PCI interfaces compatible with 3.3V and 5V PCI signaling environments.
• 1.5V core logic and 3.3V I/O cells with internal voltage regulator to generate 1.5V
core Vcc.
• PCI power-management D0, D1, D2, and D3 power states.
• Advanced submicron, low-power CMOS technology.
• Isochronous receive dual-buffer mode.
• Node power class information signaling for system power management.
• PCI burst transfers and deep FIFOs to tolerate large host latency.
• Separate cable bias(TPBIAS) for each port.
• Register access fail interrupt when the PHY SCLK is not active.