Toshiba W-804, W-808 Setting the Clock, FF, PLAY, STOP, STOP, ENTER, x2 or, FF or REW, and, 9 .), FF or, press, REW.), STOP:, PLAY/x2, digits), REW, and, PLAY/x2 or, 3) Set “CH”

Setting the Clock

Example: To set the clock to 2:30 p.m. onAugust 25 (summer time) 2000.1 Press PROG..The MENU screen appears on the TV.

2	Select “PRESET” using				FF or			REW, and
	press	ENTER.
				PROGRAM			SET UP			PRESET
					CL OCK S E T
					CH		MEMOR Y
					CAB L E			BOX / D S S
					GU I DE			CH
			EnD: PROG							ENTER
3	Press ENTER to select “CLOCK SET”.
				PROGRAM			SET UP			PRESET
				CL OCK S E T
					SUMMER			T I ME
						T I ME		DA T E Y E AR
					OUT 12 : 0 0AM1 / 0 1 ’ 00 SA
				MAnU
			EnD: PROG
4	Select “AUTO” or “MANU” using								PLAY/
	x2 or	STOP.
	AUTO: The VCR automatically sets or
	adjusts the clock.
	If you select “AUTO” mode, proceed to step								8 .

MANU: You can set the clock manually.

	If you select “MANU” mode, select “SUMMER
	TIME” using FF. Set to “IN” or “OUT” for the
	summer (daylight saving) time using				PLAY/x2
	or STOP. (For “IN” and “OUT” selections, see
	the description in step			9 .)
5	Move to the next using			FF.
	(To move back, press			REW.)
6	Vary the digits to set the hour.
	PLAY/x2: To increase.
	STOP:	To decrease.
7	Repeat steps	5	and	6 to set the minutes,
	month, day, and the year (by the last two
	digits).
	Proceed to step	10	to start the clock.

8 Press ENTER to start the “AUTO” clock set feature.

After a while, the VCR automatically updates the clock using the data broadcast by the local TV stations.

The following screen will appear on TV depending on the broadcast at your location.

		PROGRAM						SET UP	PRESET
		CL OCK				S E T
				SUMMER T I ME
							T I ME Z OnE			CH
					I n		AUTOEAS T ERn			AUTO 2
		AUTO	AUTO
						T I ME DA T E Y EAR
						9 : 5 7AM1 / 0 1 ’ 00 SA
	EnD: PROG									ENTER
9 Select the options using					FF or REW.
Change the data using					PLAY/x2 or
STOP.

1)Set “SUMMER TIME (Daylight- Saving Time)”.

IN, daylight-saving time begins on the first Sunday in April. Because the clock automatically changes from 2:00 AM to

3:00 AM (forward one hour), remember that any part of a scheduled Timer Recording that falls between these two times will not be recorded.

OUT, daylight-saving time ends on the last Sunday in October. The VCR clock automatically changes from 2:00 AM to

1:00 AM (back one hour). Therefore, it can affect your recording length if one is set for this time.

2) Set “Time Zone”.

If you select “AUTO” for your time zone, the VCR sets the clock using the first Coordinated Universal Time information it finds. If the time is not correct, select another time zone or use the “MANU” option.

3) Set “CH”.

If you don't know the clock data channel, select “AUTO”. The VCR will scan automatically to tune the channel carrying the clock data.

If AUTO CLOCK SET is unsuccessful, set the time and date through the “MANU” clock set menu selection.

10 Press PROG..Now the clock starts.11 Press PROG. to exit.

PREPARATION

17