Toshiba W-804, W-808 To Record in S-VHSET Mode, FF, ENTER, TV/VCR, CH/TRK, SP/SLP, REW or, REC on, CHANNEL, or number buttons on the remote control, REC, “ON”, Press, Press

					To Record in S-VHS ET Mode
				This VCR is equipped with Super VHS ET that makes it possible
				to record with S-VHS picture quality on VHS cassettes.
1	2	3	3	1	Load a cassette with the safety tab attached.
4	5	6		2	Press TV/VCR so that the “VCR”	SLP
7	8	9
						POWER
					indicator appears in the VCR display.		VCR
	0	100					CH
			I.SELEC	T

	PLAY/x2
REW	ENTER	FF
	STOP
VCR Plus+		DNR
A.SELECT	REMAIN	COUNT
	COUNTER	RESET
POWER	CH DOWN	CH UP

4

6

5

2

3 Select a channel to record with		POWER
		S		P
CHANNEL on the VCR, or	CH/TRK		L

or number buttons on the remote control.

If you see “L1” or “L2” in the VCR display, press channel number appears.

•If you record cable channels via the cable box, make the output channel number of the cable box or “L1” appear, depending on your connection. (See pages 11 – 13.)

VCR

I.SELECT so that the

RECORDING

4	Press SP/SLP to select the			POWER
	recording tape speed.			S	L		P		VCR
										CH
	SP: Suitable for general recording with
	better picture and sound quality.
	SLP: Suitable for tripling recording time, but with less picture and
	sound quality than using the SP tape speed.
5	Press PROG. to display the MENU screen.
6	Select “SET UP” using		FF or REW, and press						ENTER.
7	Press STOP repeatedly to go to screen 2 of SET UP page to
	select “S-VHS ET”, and set to “ON” using							REW or		FF.
	“S-ET” indicator will appear on VCR display when								“ON”	is selected.
8	Press	REC on the VCR, or	REC on						REC		TIMER
	simultaneously press both
	the remote control.			POWER
				S			P
	The S-VHS ET recording mode will be					L			VCR
				REC						CH
	automatically selected.
9	Press	STOP to stop recording.

Note

S-VHS ET does not work with S-VHS tapes.

29