SETTING THE VIDEO | SETTING THE CLOCK |
CHANNEL |
To view playback of a recorded tape, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel).
When a TV is connected with the 75 ohm coaxial cable only.
1During power off, press and hold the “3” or “4” number button on the remote control for 3 seconds. The “TV/VCR” indicator will flash 4 times.
2Turn ON the VCR POWER button.
3Turn ON the TV and set to CH 3 or 4 to correspond with the channel selected in step 1.
4Press the TV/VCR selector button to select the VCR
position.
The TV/VCR indicator will light.
5Select any channel to receive a TV station in your area.
The channel number will appear on the screen for about 4 seconds.
LANGUAGE SELECTION
This VCR can display on the TV screen in the English, Spanish or French languages.
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the video channel 3 or 4.
•Turn ON the VCR POWER button.
•Press the TV/VCR selector button to select the VCR mode.
When a TV is connected with an audio/video cable, turn the TV on and select the video input mode on the TV.
1 Press the MENU button. Press the TRACKING SET + or – button to select the LANGUAGE option, then press the ENTER button.
2Press the TRACKING SET + or – button to select the
desired language: English (ENGLISH), Spanish (ESPAÑOL) or French (FRANCAIS), then press the ENTER button.
3Press the MENU button until the menu screen is cleared.
You must set the date and time manually for timer recordings.
EXAMPLE: Setting the clock to "8:30 AM" October, 26 (SAT), 2002.
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the video channel 3 or 4.
•Turn ON the VCR POWER button.
•Press the TV/VCR selector button to select the VCR mode.
When a TV is connected with an audio/video cable, turn the TV on and select the video input mode on the TV.
1 Press the MENU button. Press the TRACKING SET + or – button to select the CLOCK SET option, then press the ENTER button.
2Press the TRACKING SET + or
– button to set the month, then press the ENTER button.
3Set the day, year and time as in Step 2.
• The day of the week will
automatically appear when
you set the year.
• Press and hold down the button to increase/ decrease the minute by 10.
• After setting, the date and
time will start functioning automatically.
NOTES: •After a power failure or disconnection of the power, the timer settings will be lost. In this case, reset the present time.
•Press the CANCEL button to move cursor backward for correction.
•If you want to correct time or date while the clock is functioning, press the MENU button, then press TRACKING SET + or – button to select the CLOCK SET option, then press the ENTER button.
To make any adjustments perform steps 2 through 3.
15