SPECIAL PLAYBACK
TO VISUALLY SEARCH FOR
DESIRED POINTS
When either the FF or REW button is pressed in the PLAYBACK mode, the speed search picture will appear. When pressed twice, the search picture will increase speed. Speed search time depends upon the speed used (SP, LP or SLP) during recording.
TO WATCH A STILL PICTURE
Press the PAUSE/STILL button in the PLAYBACK mode. Press the PAUSE/STILL button again to resume normal playback.
FRAME BY FRAME ADVANCE
Press the SLOW button during STILL playback. The still picture will advance by one frame each time you press the button. Hold the button for continuous frame by frame viewing.
Press the PAUSE/STILL button again to resume normal playback.
NOTES: • A few noise bars will appear on the picture during SPEED SEARCH and STILL.
•The audio output is muted during SPEED SEARCH, STILL, FRAME ADVANCE and
SLOW MOTION.
•To prevent damage to the tape, special playback is automatically changed to the PLAYBACK mode after 5 minutes.
SLOW MOTION PLAYBACK
Press the SLOW button in the PLAYBACK mode. Playback will proceed at 1/10th of the normal speed. Press the PLAY button again to resume normal playback.
NOTE:
If noise bars appear in the picture during slow motion, press the TRACKING SET + or – button to reduce the noise bars.
If the still picture jitters excessively, press the TRACKING SET + or – button to stabilize the still picture.
TO WATCH A TAPE REPEATEDLY
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the video channel 3 or 4.
•Turn ON the VCR POWER button.
•Press the TV/VCR selector button to select the VCR mode.
When a TV is connected with an audio/video cable, turn the TV on and select the video input mode on the TV.
1 Press the MENU button. Press the TRACKING SET + or – button to select the AUTO REPEAT option.
2 Press the ENTER button to select the ON position.
3 Press the MENU button.
If you press the PLAY button, the tape will play over and over until the repeat mode is canceled.
" 
" will appear if you press the DISPLAY button. To cancel, press the DISPLAY button again.
NOTE: To cancel repeat mode, follow the above steps 1 and 2, then press the ENTER button to select the OFF position. Press the MENU button to return to the TV.
TAPE SPEED AND RECORDING/PLAYBACK TIME
You can select the two different tape speeds before recording.
| VIDEO CASSETTE TAPE | ||
|
|
| |
TAPE SPEED | T120 | T160 | |
SP | 2 hours | ||
Standard Play | |||
|
| ||
|
|
| |
SLP | 6 hours | 8 hours | |
Super Long Play | |||
|
| ||
|
|
| |
This VCR selects the playback tape speed SP, LP(Long Play) or SLP automatically.
RECORDING A TV
PROGRAM
RECORDING AND VIEWING THE SAME TV PROGRAM
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the video channel 3 or 4.
•Turn ON the VCR POWER button.
•Press the TV/VCR selector button to select the VCR mode.
When a TV is connected with an audio/video cable, turn the TV on and select the video input mode on the TV.
1Load a cassette tape with the erase prevention tab intact. The VCR will automatically turn on.
18