LOCATION OF CONTROLS (Continued...)
REAR | 31 | 32 |
OUT LINE1 UHF/VHF
VIDEO IN(ANT)
L
AUDIO OUT(TV)
R
35 | 34 | 33 |
15.Direct Channel Selection buttons
16.STOP button - Press to stop the tape.
17.MENU button - Press to display the
18.TRACKING SET + / – buttons
19.TIMER button - Used to set the VCR to start record- ing at a preset time.
20.SLOW button - Press to play back a tape in slow mo- tion or to advance the tape one frame at a time during still playback.
21.COUNTER RESET button - Resets the Real Time Tape Counter to 00:00:00.
22.TV/VCR selector button - Switches between TV and VCR.
23.PAUSE/STILL button - During recording, this
button temporarily stops the tape. The "
" will appear on the screen. During playback, it stops the tape and displays a still image on the TV screen.
24.ENTER button - Used to enter the information in the menu mode.
25.DIGITAL TRACKING button - Allows automatic adjustment of tracking to minimize picture noise during playback.
26.CANCEL button - Used to clear the selected timer recording program.
27.AUDIO SELECT button - Switches sound between mono and stereo, and SAP when receiving broad- casts in stereo or SAP.
28.INPUT SELECT button - Switches the program for viewing between the VCR and external input sources.
29.DISPLAY button - Displays the present time/day of the week, channel, counter, speed selection and VCR mode on the TV screen.
30.SP/SLP selector button - Sets the tapespeed for recording.
31.AUDIO (L/R)/ VIDEO OUT Jacks - Use to output audio and video signal to a TV, amplifier or VCR.
32.UHF/VHF IN (ANT) Jack - Connect a UHF/VHF antenna or CATV cable to this jack.
33.UHF/VHF OUT (TV) Jack - Use to output UHF/VHF or CATV signal to a TV.
34.AUDIO (L/R)/ VIDEO IN (LINE 1) Jacks - Audio and video signal cables from an external source can be connected here.
35.AC Power Cord - Connect to a 120V 60Hz outlet.
9