SETTING THE CHANNELS

This VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the VCR’s memory. In addition to normal VHF and UHF channels, this VCR can receive up to 113 Cable TV channels. To use this VCR with an antenna, set the TV/CATV menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.

TV/CATV SELECTION

1Press the MENU button.

2 Press the TRACKING SET + or – button to select the CH SET UP option, then press the ENTER button.

3Press the TRACKING SET + or –

button to select the TV/CATV mode.

4 Press the ENTER button to select the TV or CATV mode. The arrow indicates the selected mode.

TV

- VHF/UHF channels

CATV

- CABLE TV channels

 

 

5Press the MENU button twice to return to normal TV viewing.

VHF/UHF/CATV CHANNELS

TV

 

CATV

 

VHF

 

VHF

 

2-13

 

2-13

 

UHF

STD/

HRC/

IRC

14-69

14-36

(A)

(W)

 

37-59

(AA)

(WW)

 

60-85

(AAA)

(ZZZ)

 

86-94

(86)

(94)

 

95-99

(A-5)

(A-1)

 

100-125

(100)

(125)

 

01

(5A)

 

AUTOMATIC MEMORY TUNING

The VCR can receive a maximum of 181 channels by presetting the channels into memory.

CHECK BEFORE YOU BEGIN

•Turn ON the TV and set to the video channel 3 or 4.

•Turn ON the VCR POWER button.

•Press the TV/VCR selector button to select the VCR mode.

When a TV is connected with an audio/video cable, turn the TV on and select the video input mode on the TV.

TO ADD/DELETE CHANNELS

1 Press the MENU button. Press the TRACKING SET + or – button to select the CH SET UP option, then press the ENTER button.

2 Press the TRACKING SET + or

– button to select the ADD/DE- LETE mode, then press the ENTER button.

3 Select the desired channels to be added or deleted using the TRACKING SET + or – button.

4Press the ENTER button if you wish to DELETE the channel

from memory.

Press the ENTER button if you wish to ADD the

unmemorized channel.

Repeat Steps 3 and 4 for each channel to be added or deleted.

5Press the MENU button three times after adding or deleting all of the desired channels, to return to normal TV viewing.

NOISE ELIMINATION

When you don't want to receive a weak signal broadcast, the Blue Back Screen can be obtained by selecting the NO NOISE BACKGROUND "ON". When the unit is shipped from the factory, the NO NOISE BACKGROUND is set to the "ON".

CHECK BEFORE YOU BEGIN

• Turn ON the TV and set to the video channel 3 or 4.

• Turn ON the VCR POWER button.

• Press the TV/VCR selector button to select the VCR

1Press the MENU button. Press the TRACKING SET + or – button to select the CH SET UP option, then press the ENTER button.

2Press the TRACKING SET + or – button to select the AUTO CH MEMORY mode, then press the ENTER button.

3The auto tuning will start. The channel display will count up and when finished, the screen returns to normal.

MENU

 

 

CLOCK SET

 

 

TIMER REC SET

 

 

AUTO REPEAT

ON

OFF

CH SET UP

 

 

SAP

ON

OFF

LANGUAGE/IDIOMA/LANGUE NO NOISE BACKGROUND 〈+/—/ENTER/MENU 〉ON OFF

mode.

When a TV is connected with an audio/video cable, turn the TV on and select the video input mode on the TV.

1 Press the MENU button, then press the TRACKING SET + or

– button to select the NO NOISE BACKGROUND option.

2Press the ENTER button to

select the ON position.

3 Press the MENU button again.

16

16