STEREO RECORDING AND PLAYBACK
RECORDING STEREO BROADCASTS
The VHS
When an MTS STEREO
broadcast is received, the STEREO STEREO will appear on the
screen and the program can be viewed or recorded in stereo (refer to pages 18 and
19 for recording procedures).
The
SECOND AUDIO
PROGRAM (SAP)
Your VCR is fitted with an SAP broadcast system which enables you to switch to a SECOND AUDIO PROGRAM when viewing a selected channel.
This function applies only when the program is broadcast in
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the video channel 3 or 4.
•Turn ON the VCR POWER button.
•Press the TV/VCR selector button to select the VCR mode.
When a TV is connected with an audio/video cable, turn the TV on and select the video input mode on the TV.
NOTE: When using a CATV system, stereo TV programs may be transmitted over a mono cable channel. In this case the word “STEREO” will not appear and the sound will be in mono.
OUTPUT SELECTION
When viewing an MTS STEREO TV program, or playing a prerecorded VHS
1Press the MENU button. Press the TRACKING SET + or – button to select the SAP option.
2Press the ENTER button to select the ON position.
3Press the MENU button again.
MENU |
|
|
CLOCK SET |
|
|
TIMER REC SET |
|
|
AUTO REPEAT | ON | OFF |
CH SET UP | ON | OFF |
SAP |
LANGUAGE/IDIOMA/LANGUE 
NO NOISE BACKGROUND
OFF | |||
| MENU |
|
|
| CLOCK SET |
|
|
| TIMER REC SET |
|
|
| AUTO REPEAT | ON | OFF |
| |||
| |||
| CH SET UP | ON | OFF |
| SAP | ||
| |||
LANGUAGE/IDIOMA/LANGUE 
NO NOISE BACKGROUND
poor quality. The "R" and "L" positions allow the audio from the Right or Left
OUTPUT | SOUND HEARD ON BOTH |
SELECTION | SPEAKERS |
|
|
STEREO | STEREO |
L CH | LEFT CHANNEL AUDIO |
R CH | RIGHT CHANNEL AUDIO |
MONO | MONO |
|
|
LISTENING TO SAP
When the VCR is turned on or a channel selection is made, make certain “SAP” appears on the screen. This means that the "Second Audio Program" broadcasting is available.
STEREO SAP | SAP |
OR
NOTES: •When playing back a tape that is not recorded in
•When listening to a VHS
22