ONE-TOUCH TIMER
RECORDING (OTR)
The
EXAMPLE:
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the video channel 3 or 4.
•Turn on the VCR POWER button.
•Press the TV/VCR selector button to select the VCR mode.
When a TV is connected with an audio/video cable, turn the TV on and select the video input mode on the TV.
SETTING THE TIMER RECORDING
Timer recording can be programmed
EXAMPLE: Program a timer recording for the 26th day, channel 125 (CATV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: SLP).
CHECK BEFORE YOU BEGIN
• Turn on the TV and set to the video channel 3 or 4. |
• Press the TV/VCR selector button to select the VCR |
mode. |
1 | Load a cassette tape with the |
| erase prevention tab intact. |
2 | Press the SP/SLP selector |
| button to select the desired |
| tape speed SP or SLP. |
| The counter and SP or SLP |
• Load a video cassette with the erase prevention tab |
intact. The VCR will automatically turn on. |
• Check that the clock and date are correct (see page 15). |
When a TV is connected with an audio/video cable, turn the TV on and select the video input mode on the TV.
will appear on the screen for |
about 4 seconds. |
3 Press the direct channel |
selection buttons or the |
CHANNEL or button to |
select the channel to be |
recorded. |
The channel number will |
appear on the screen for about |
4 seconds. |
4 Press the REC button to begin |
recording. Press the button |
again to stop recording after |
30 minutes. Each additional |
press of the REC button will |
increase recording time as |
shown in the chart below, up to |
a maximum of 5 hours. The |
OTR and recording time will |
appear on screen for about 4 |
seconds. |
00 : 00 : 00 SP
CH 125
OTR 0 : 30
CH 125
1 Press the MENU button. |
Check the TIMER REC SET |
option is selected, then press |
the ENTER button. |
2 Press the TRACKING SET + or |
– button to select one of the |
program lines then press the |
ENTER button. |
3 Press the TRACKING SET + |
or – button to select the date, |
then press the ENTER |
button. |
4 Set the start time, end time, |
channel and tape speed as in |
step 3. |
NOTE: To record from external |
source set the channel |
to "L1" or "L2". “L1 |
(from AUDIO/VIDEO IN |
jacks on the rear)” or |
“L2 (from AUDIO/ |
VIDEO IN jacks on the |
| MENU |
|
|
| |
| CLOCK SET |
|
|
| |
|
|
|
| ||
| TIMER REC SET |
|
| ||
|
|
| |||
| AUTO REPEAT | ON | OFF |
| |
|
| ||||
| CH SET UP |
|
|
| |
| SAP |
| ON | OFF |
|
|
|
| |||
|
|
| |||
| LANGUAGE/IDIOMA/LANGUE | ||||
| NO NOISE BACKGROUND |
| |||
|
| ||||
OFF |
| ||||
DATE | START | END | CH |
| |
– – – – – | – – – | ||||
– – – – – | – – – | ||||
– – – – – | – – – | ||||
– – – – – | – – – | ||||
– – – – – | – – – | ||||
– – – – – | – – – | ||||
– – – – – | – – – | ||||
– – – – – | – – – | ||||
| |||||
DATE | START | END | CH | - | |
26(SU) | |||||
- | |||||
- | |||||
- | |||||
- | |||||
- | |||||
- | |||||
- | |||||
NOTES: • Press the REC button to increase the time needed for recording (See the chart ).
•To cancel OTR, press the STOP button or turn off the power.
Press | Recording time |
once | NORMAL REC |
twice | 0:30 |
3 times | 1:00 |
4 times | 1:30 |
5 times | 2:00 |
6 times | 3:00 |
|
|
7 times | 4:00 |
|
|
8 times | 5:00 |
|
|
9 times | NORMAL REC |
front)” will appear next |
to CH 125 (or 69). |
5 To enter other programs, |
repeat step 2 through 4. Or, |
press the MENU button twice |
to return to the normal screen. |
6 Press the TIMER button. The |
power will go off, the T.REC |
indicator will light and the |
VCR stands by for recording. |
| To cancel timer recording, press the button again and | |
| the T.REC indicator will go out. | |
20 | NOTE: Step 6 cannot be completed unless a video | |
cassette has been inserted into the VCR. | ||
|